Pro Leaf CO2 Regulator PPM-CR1

Description Pro Leaf CO2 Regulator Flowmeter with Solenoid PPM-CR1 The Pro-Leaf CO² regulator is simple to use and will allow you to regulate and maintain ideal CO² levels for optimal growth. The Pro Leaf CO² regulator includes a precision regulator flow gauge, industrial solenoid value and plastic dispensing tube. This CO2 Regulator will allow you to maintain ideal CO2 levels for optimal growth. It can be used for indoor grow rooms, grow tents, and greenhouses to enhance carbon dioxide to the growing environment, speed up growth rates and yields. • Perfectly pairs with our Co2 controllers. Precision accuracy flow meter-0.5-15 SCF/hour. • Hose tail: suitable for 4.2mm inside diameter hose with solenoid value and Australian standard plug • Features heavy-duty solenoid valve. • High-quality oil-less pressure gauge. • Includes two plastic tank washers and 12 ft of CO2 dispensing line. • Brass construction for long-lasting dependability and durability. • 1Amp/120 Volts/60Hz High flow rates and the resulting low temperature, risk freezing open the regulator, flowmeter & solenoid. This will result in the solenoid not closing and dumping the entire contents of the gas bottle into the room. A maximum flow rate of 0.5 to 1 litre per minute (L/min) is recommended to avoid this situation occurring. A longer dose time at a lower flow rate is required. Also be aware that CO₂ is heavier than air and will fall to the ground in enriched CO₂ rooms, an oscillating fan at ground level aimed upwards is required to push CO₂ back into the plant canopy. The stomata on the underside of the leaf opens to receive the extra CO₂. Specification: • High pressure gauge:0-4000psi • Maximum Inlet Pressure:150kg/cm2 • Maximum Oulet Pressure:4kg/cm2 • Inlet connection:CGA320 • Plug: America type plug • Flowmeter:0-15 scfh