Description Description – 135 hitch points and 9 pawls made of high-strength treated steel. – 3 groups of 45 hitch each obtaining 135 hitch points per revolution. – Extraction using ISIS bottom bracket extractor. – Standard thread of 1,37 ” x 24T – New COMAS internal springs reinforced to increase reliability and accuracy. – Sealed bearings on both sides to prevent dust and dirt from entering the mechanism. – Compatible with 1/8 “and 3/32” chains Material – Crown: Cr-Mo machined steel – Body: Cr-Mo machined steel Compatibility – Not compatible with BB30 crankset – Not compatible with cassette-type cranks Sizes – 18 teeth – 9 pawls – 135 hitch points – Tooth width: 2.2mm – Total width: 17mm Weight – 176g Finish – Finished in black with COMAS graphics laser engraved. Additional Information It is advisable to make a preliminary run of the freewheel to eliminate excess grease from the mechanism and ensure the correct setting of the pawls. This process can be accelerated by introducing a little oil in the groove between the center of the freewheel and the teeth. If the freewheel is used for trial without having set the pawls first, it will not work properly and will cause it to jump, damaging the slot and the pawl.
01733 689113
• Monday - Saturday