⚠️ This model is being phased out — replaced by the Hikvision DS-1LN6UZC0 Stock is almost exhausted. The current replacement is Hikvision DS-1LN6UZC0 — same solid copper core, Fluke certified, available now at a lower price.Hikvision DS-1LN6-UE-W Cat6 Cable — Blue 305m Pull Box 24AWG solid bare copper · Cat6 U/UTP · Blue · 305m · ISO/IEC11801 · TIA-568-C.2 · RoHS · 80V PoE ratedThe Hikvision DS-1LN6-UE-W Cat6 cable is a U/UTP solid bare copper cable — 99.95% copper purity — delivering lower DC resistance and reliable PoE performance versus CCA (copper-clad aluminium) cable. CCA looks identical externally but has significantly higher resistance, causing voltage drop on longer runs that results in cameras dropping offline or failing to power on. The Hikvision DS-1LN6-UE-W Cat6 cable is being phased out and replaced by the Hikvision DS-1LN6UZC0, which carries the same solid copper core with Fluke certification and is available now at a lower price.Hikvision DS-1LN6-UE-W Cat6 Cable — Solid Copper Core for Reliable PoEWith DC resistance of ≤9.38Ω/100m and an 80V operating voltage rating, the Hikvision DS-1LN6-UE-W Cat6 cable supports 802.3af (PoE), 802.3at (PoE ), and 802.3bt (PoE ) powered devices including Hikvision IP cameras, NVR PoE ports, wireless access points, and VoIP phones. The solid copper conductor in the Hikvision DS-1LN6-UE-W Cat6 cable maintains consistent voltage delivery across the full 100-metre channel, ensuring cameras stay online and perform at full specification.305m Blue Pull Box — Built for Professional InstallationThe Hikvision DS-1LN6-UE-W Cat6 cable comes in a 305-metre blue pull box that feeds cleanly without tangling, kinking, or re-spooling across large floor plates, ceiling spaces, and multi-floor structured cabling runs. The blue PVC outer sheath provides mechanical protection against tensile and compressive forces during installation. HDPE insulation on each conductor maintains consistent 100Ω impedance. Rip cord included as standard.SpecificationDetailModelDS-1LN6-UE-WCable TypeU/UTP Cat6Length305 metres (±1.5m)Conductor MaterialSolid bare copper (99.95%)Conductor Diameter0.530mm (24AWG)Insulation MaterialHDPE (0.95 ± 0.05mm)Jacket MaterialPVC (5.8 ± 0.4mm OD)Jacket ColourBlueDC Resistance≤ 9.38 Ω/100mImpedance100 ± 15 Ω (1.0–250.0 MHz)Operating Voltage80VOperating Temperature-20°C to 75°CRip CordYesStandardsISO/IEC11801 · TIA-568-C.2 · UL444 · RoHSLength per Box305m (±1.5m)Where the Hikvision DS-1LN6-UE-W Cat6 Cable Is Used�� IP CCTV and NVR installations — The Hikvision DS-1LN6-UE-W Cat6 cable carries both data and PoE power over the same pair from NVR port to camera. Solid copper delivers consistent voltage over the full 100-metre channel, eliminating the drop-outs that CCA cable produces on longer runs. While stocks of this model remain, it performs reliably for both residential and small commercial camera deployments.�� Structured cabling installations — The Hikvision DS-1LN6-UE-W Cat6 cable meets ISO/IEC11801 and TIA-568-C.2 for data, voice, and access control infrastructure. The blue pull box colour-codes the horizontal cabling layer cleanly on site.⚡ Electricians and security installers — The Hikvision DS-1LN6-UE-W Cat6 cable handles most residential and small commercial runs from a single 305m box. Solid copper spec protects against callbacks from cameras dropping offline months after installation. Note: the replacement DS-1LN6UZC0 is available now at a lower price with Fluke certification — worth considering for new jobs.Frequently Asked Questions — Hikvision DS-1LN6-UE-W Cat6 CableQ: What replaces the Hikvision DS-1LN6-UE-W Cat6 cable? The direct replacement is the Hikvision DS-1LN6UZC0 — same solid bare copper core, same Cat6 U/UTP construction, same 305m blue pull box format. The DS-1LN6UZC0 adds Fluke 90m permanent link and 100m channel certification under PoE load and is available now at a lower price than the DS-1LN6-UE-W Cat6 cable.Q: Is the Hikvision DS-1LN6-UE-W Cat6 cable suitable for PoE IP cameras? Yes. The Hikvision DS-1LN6-UE-W Cat6 cable is rated to 80V operating voltage with DC resistance of ≤9.38Ω/100m, supporting 802.3af, 802.3at PoE , and 802.3bt PoE devices. The solid bare copper conductor delivers consistent voltage over the full 100-metre channel — unlike CCA cable which causes voltage drop and camera drop-outs on longer runs.Q: How much cable do I need for my installation? Cable runs are never straight-line distances — every run travels up walls, across ceiling spaces, around obstacles, and back down to the camera position, so real-world runs are always longer than a floor plan suggests. A qualified installer or electrician will measure actual run lengths and calculate the quantity needed before ordering. Allow additional cable for waste, termination tails, and any reruns.Looking for the Current Model?The Hikvision DS-1LN6UZC0 replaces the DS-1LN6-UE-W Cat6 cable — Fluke certified, solid copper, 305m blue pull box, available now at a lower price. Pair it with the Hikvision IP camera range and a Hikvision PoE NVR for a complete single-cable system.The Hikvision DS-1LN6-UE-W Cat6 cable is part of the Hikvision structured cabling range at Comms Direct. Ships fast from Australian warehouses while stocks last.For pre-purchase technical advice, contact us via the enquiry form or chat with us online.
